# Set up your own sender address

> How your campaigns come from your own email address, which of the two ways fits you, and what you set up on your domain for it.

Web page: https://staging.event-buddy.de/en/docs/set-up-your-own-sender-address · Deutsch: https://staging.event-buddy.de/docs/eigene-absenderadresse-einrichten.md

Without further settings your campaigns come from an Eventbuddy address, for example `your-name@eventbuddy.net`. Replies still reach you (see [Where replies go](#where-replies-go)). If your emails should come from your own address, say `news@your-domain.com`, there are two ways. For now we turn both on by request: message us if you would like to use one of them. Ticket and order emails are not affected: they always come from Eventbuddy.

You find the setting under **Settings → Organizer**, tab **Sender**. Anyone who may manage the team can change it.

## Where replies go

Replies to your campaigns go to the **Campaign reply-to address** at the top of the **Sender** tab, whichever address the email comes from. If you leave it empty, they go to your support email. A freemail address such as gmail.com is fine here, an Eventbuddy address is not: replies should reach you, not us. Without an address that reaches you, you cannot send a campaign or a test email.

## Which way fits you?

|  | Own address via Eventbuddy | Own mail server |
| --- | --- | --- |
| What you need | Access to the DNS settings of your domain | The credentials of your SMTP server |
| Who sends | Eventbuddy, in your name | Your server |
| Statistics | Complete: delivered, bounced, spam complaints, opens, clicks | Opens and clicks only. Whether an email arrived we cannot see |
| Freemail addresses (gmail.com, gmx.de, outlook.com, …) | Not possible | Possible |
| Speed | As usual | Slower; the limits of your server apply |

For most organizers **Own address via Eventbuddy** is the right way. **Own mail server** is for organizers who have to send their emails themselves for some reason, or whose address is with a freemail provider.

## Own address via Eventbuddy

Eventbuddy keeps sending through its servers, but with your address as the sender. For recipients to recognise that as genuine, you have to add a few records to the DNS settings of your domain. You do that at the provider where you registered your domain (for example GoDaddy, Namecheap, IONOS, Cloudflare).

1. Choose **Own address via Eventbuddy** and enter your sender address. Optionally a display name other than your organizer name.
2. Click **Start setup**. The table **DNS records for your-domain.com** appears below with every record.
3. Create each record at your domain provider. The copy icon takes name and value over without typos. Depending on the provider you enter only the part before your domain as the name; some want the full name.
   - **3 records of type CNAME** (DKIM): with these we sign your emails in your name.
   - **1 record of type MX** and **1 record of type TXT** for the subdomain `mail.your-domain.com`: feedback about undeliverable emails comes back through it.
   - **1 record of type TXT** for `_dmarc.your-domain.com`: recommended, not required. If you already have a DMARC record, leave it as it is.
4. Click **Check now**. DNS changes take a few minutes to several hours. We also check regularly on our own; you do not have to keep the page open. Each record shows whether it was **Found**, is still **Pending** or is **Faulty**.
5. Once every required record is found, the status reads **Verified** and your next campaigns come from your address. You get an email from us about it. **Send test email to me** shows you what that looks like.

> **Warning**
>
> Until the records are found, your campaigns keep leaving from the Eventbuddy address. The tab and the **Continue to send** step tell you which address is in use right now. If not everything is found after 7 days, we stop checking and write to you. Correct the records and click **Check now** to continue.

In the first weeks we send at most 500 emails a day through a new domain, so it builds a good reputation with the mail providers. Larger campaigns then go out in stages; you see that before sending. If you need more, write to us.

Keep the records in place as long as you use the address. We check a verified domain once a day as well. If the records are gone, we pause campaigns that are running with your address and write to you; see [When your sender fails](#when-your-sender-fails).

## Own mail server

Your campaigns leave through your own SMTP server, for example the one of your hosting provider or your office mailbox.

1. Choose **Own mail server** and enter sender address, server, port, encryption, user name and password. The usual values are listed by the provider of your mailbox under “SMTP”: mostly port 587 with **STARTTLS** or port 465 with **SSL/TLS**. The ports 25, 465, 587 and 2525 are possible; with a user name and password only with encryption. We store the password encrypted and never show it again.
2. Leave **Verify the server's certificate** switched on. Only a server with a self-signed certificate needs the switch off.
3. Click **Save** and then **Send test email to me**. The test email only goes to your own address. Only once it has arrived do we use your server for campaigns.

If the test email fails, your server's answer is shown below. Mostly it is a wrong password, a wrong port or an encryption the server does not offer. Change the details, save and test again.

If you later change the server, port, encryption or user name, enter the password again: we only send the stored password to the server you entered it for. After every change of the connection or the sender address, send a test email again; until then we do not use your server.

> **Warning**
>
> With your own mail server we only see whether your server accepted the email and whether it was opened or clicked. Whether it was really delivered, came back as undeliverable or was reported as spam, we do not learn. The statistics of a campaign say so and leave those numbers empty. The limits of your server apply as well: many mailboxes allow only a few hundred emails a day. We therefore send more slowly than through Eventbuddy.

## When your sender fails

If your server refuses the connection, the login or the email several times in a row during a send, for instance because the password was changed, or the DNS records of your domain are gone, we pause the campaign. We do not switch to the Eventbuddy address on our own: your recipients should not see a different sender in the middle of a campaign. A single hiccup pauses nothing. The emails already sent are out, the remaining recipients wait, and you get an email with your server's answer.

You then have two options:

- **Fix the sender**: correct the details in the **Sender** tab and send a test email (with an own domain: restore the records and click **Check now**). Then click **Resume** on the campaign's page, and sending continues from your address. As long as the sender does not work, the campaign cannot be resumed this way.
- **Resume with the Eventbuddy address**: on the campaign's page. The remaining recipients then get the email from the Eventbuddy address. This applies to this campaign only and cannot be switched back for it.

## Back to the Eventbuddy address

Choose **Eventbuddy address** and click **Remove own sender**. With an own domain you can delete the DNS records afterwards. A campaign that is running with your sender is paused; resume it on its page with **Resume with the Eventbuddy address**.

## Frequently asked questions

### My provider only wants the part before the domain as the name of a record.

Then leave your domain off the end: `abc123._domainkey.your-domain.com` becomes `abc123._domainkey`. The value always stays complete.

### I added the records, but the status stays on “Pending”.

DNS changes take time, sometimes up to a day. Check that the name is exactly right (no doubled `your-domain.com` at the end) and that the value was taken over without quotation marks. Then click **Check now**.

### Can I use my Gmail or Outlook address as the sender?

Only via **Own mail server**, with the SMTP credentials of your mailbox. These providers do not allow other services to send in their name, so it does not work via Eventbuddy. Note that such mailboxes may only send a few emails a day.

### My domain cannot be set up: “already set up”.

A domain can be used by one organizer at Eventbuddy only. If it is set up in another account, for example a second organizer account of yours, remove it there first. If it is yours and you do not know where it is set up, write to us.

### What do recipients see as the sender?

Your organizer name (or the display name you entered) and your address. Replies go to your campaign reply-to address, or to your support email if you have not set one.

## Next step

[Request a test shop](https://staging.event-buddy.de/en/demo)

Request without the form: email [neukunde@eventbuddy.de](mailto:neukunde@eventbuddy.de?subject=Request%3A%20Set%20up%20your%20own%20sender%20address) with your organization, date and price list.
